Add items to your Wish List to send to our team for pricing. We respond to enquiries within one working day.
Robe_Tetra-2_1Robe_Tetra-2_1

Robe – Tetra2

Robe

TETRAgnatha’s are linear bars building on the Spiider and Tarrantula technology with TETRA2™ the uncompromising leader of the Tetra family.

Categories: , , ,

Description

Generating an ultra-tight 4° beam from each of the 18 pixels, they combine to produce a bright, defined “sheet” of light, desired by Lighting Designers. Seamless curtains of light can be constructed using several fixtures as the detailed design allows any combination of TETRA1™ and TETRA2™ to be placed end to end on stage or truss, whilst maintaining equal spacing between pixels. With the addition of two exclusive Robe patented MCFE™ – Multi-Coloured Flower Effects, the pixel-driven Tetra1 sets itself apart from others by projecting charismatic in- air animations.

The homogenised beams, together with the smooth 11:1 zoom, provide; a wash out to 45°, a footlight, a wall graze or dynamic in-air effects with fast paced sweeping movements. Utilizing our latest L3™ (Low Light Linearity) dimming system for an imperceptible fade to black, the 18-bit control provides ultra-smooth colour mixing across the full colour spectrum. An embedded Ethernet switch and wide range of protocols (sACN, Art-Net or Kling-Net) allow a quick network installation and ease of control from media servers, DMX or the internal effects engine.

Features

  • Light source 18x 40 W RGBW LED multichips
  • Light output 10.500 lm
  • Zoom range 4° – 45°
  • Effects 2x MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented), pixel control, virtual colour wheel, tungsten lamp effect

Video

Tetra family Product Video by Robe Lighting

TETRAgnatha’s are linear bars, built on the highly successful Spiider and Tarrantula technology. TETRA2™ is the larger format of the TETRAgnatha duo.

Additional information

Source

Light source type: 18x 40W RGBW LED multichips
LED life expectancy: min. 50.000 hours
Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical Systems

Robe’s proprietary optical design
Zoom range: 4°- 45°
Highly efficient component optics
Fixture total lumen output
10.500 lm (integrating sphere)
8.439 lm (goniophotometer)
Dynamic Effects

Colour mixing mode RGBW or CMY
Individual control of each RGBW pixel
Variable CCT: 2.700K – 8.000K
Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
2x MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (patented)
Motorized zoom
2 independent zoom zones
Pre-programmed random strobe & pulse effects
Electronic strobe effect with variable speed up to 20 Hz
High resolution electronic dimming: 0 – 100%
L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
Controls & Programming

Setting & Addressing: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 88 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
REAP™ – Robe Ethernet Access Portal
Wireless CRMX™ technology from Lumen Radio – on request
DMX Protocol modes: 6
Control channels: 34, 56, 97, 115, 110, 128
RGBW / CMY: 8 or 16 bit
Zoom: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movment

Tilt movement: 191°
16 bit movement resolution
Controllable speed of Tilt movement
Thermal Specification

Maximum ambient temperature: 40°C (104°F)
Maximum surface temperature: 70°C (158°F)
Minimum operating temperature: -5°C (23°F)
Total heat dissipation: max. 2047 BTU/h (calculated)
Electrical Specification & Connections

Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption: 600 W at 230 V / 50 Hz
Power in/out connector: Neutrik powerCON TRUE1 in/out
DMX and RDM data in/out: Locking 5-pin XLR
Ethernet port in/out: RJ45
Embedded Ethernet switch 10/100 Mbps
Mechanical Specification

Height: 279 mm (10.98") – head in vertical position
Width: 1007 mm (39.6")
Depth: 143 mm (5.62") – head in vertical position
Weight: 18.1 kg (39.9 lbs)
Ingress protection rating: IP20
Rigging

Mounting points: 2 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Universal operating position
Safety cable attachment point
Included Items

User Manual
Variable Omega Adaptor: 2 pcs 99016241-02
Power cord including powerCON TRUE1 In connector
Optional accessories

Diffusion filter: 2° 10980593
Clear lens cover: 10980606
Safety wire 36 kg: 99011963
Daisy Chain powerCON TRUE1 In/Out, EU, 2m, Indoor: 13052439
Daisy Chain powerCON TRUE1 In/Out, US, 2m, Indoor: 13052440
Daisy Chain powerCON TRUE1 In/Out, EU, 5m, Indoor: 13052444
Single Top Loader Case: 10120259
Triple Top Loader Case: 10120264
Foam Shell: 20020371
Omega Adaptor CL-variable 2pcs in box: 10980550
Legal

Tetra2™ is a Trademark of Robe lighting s. r. o.
Tetra2™ is patented by Robe lighting s. r. o. and protected by one or more pending or issued patents

Downloads

User Guide Download
Data Sheet Download