Description
THE REGULATIONS
High integrity hoists prepared for incorporation into
D8PLUS hoisting Systems.
These hoists enable:
(when people are below the load):
Load holding when loads are static
The hoists do not enable:
(when people are below the load):
Assembly/disassembly during set up
Staging processes involving movement
D8PLUS FEATURES
- Second brake
- De-rating of the lifting capacity to give an increased safety factor of at least 8:1 safety coefficient of the load bearing material, according to DIN56950-1, 2012 standard
OR
- De-rating of the lifting capacity to give an increased safety factor of at least 8:1 safety coefficient of the load bearing material, according to IGVW SQP2 2012 Code of Practice.
- Clutch overload device is mounted outside the drive train; In the event of clutch problems, the load is not compromised
FEATURES – GENERAL
- Modern, quiet, reliable and proven design, manufactureand assembly mean long life and competitive pricing
- Lightweight
- Lifting capacities from 125 to 3200kg
- 2 independent spring-loaded DC brakes
-
The entire chain fall (load chain, hooks, body) is designed with a statistical safety factor of at least 8:1 (when used as ISO M5, FEM 2m duty ), meaning wear of the components is decreased and the life cycle is extended four times, to 16,000 hours (ISO M5, FEM 2m)
- Direct control or low voltage control – with upper/lower geared electrical limit switches
- Contactor control – no electronics
- Clutch overload device mounted outside the drive train; in the event of clutch problems, the load is not compromised
- Can be used upright – motor up or climbing – motor down
- Aluminium body – black electrophoretic coated with zinc plated or black chain
- Eye body suspension is standard, hook suspension and locking chain hooks on request
- Available for 400V, 3Ph, or 220V, 1Ph power, others on request
FEATURES – NEW LP/LPM HOIST
- A new hoist from LTM
- Designed for higher lifting capacities, with higher duty and longer lifetime hours
- IP65 Protection class – ideal for outside use, the moisture sensitive components are housed separately and sealed
- NEW Profle (square) steel lifting chain carries heavier loads with lower wear, black phosphate protection with high corrosion resistance and better dry running
- Polygon connections on shafts and hubs – easier maintenance
- Opening eye suspension- ideal for installations
- Simple, reliable, easy to use and maintain
OPTIONS
- Hoist can be set to D8PLUS Specification
according to DIN 56950-1 2012 Standard OR D8PLUS specification according to IGVW SQP2 Code of Practice
- Hoists can be upgraded with additional options which include Working and ultimate limit switch Combined Assemblies, load sensing additions or encoders for positional feedback
- Hoists for single phase power
- Locking hooks
- Flight cases
- Special paint fnishes